Home > Other 3D lenticular > 3D lenticular sheet material > 40LPI lenticular sheets for inkjet printer

40LPI lenticular sheets for inkjet printer

  • 18lpi lenticular board
  • 25lpi PS lenticular board
  • 32lpi ps lenticular board
  • 42lpi ps lenticular board
  • 100lpi 0.6mm PET lenticular sheet
  • 100LPI 0.35MM  PET lenticular sheet
  • 75LPI 0.45MM  PET lenticular sheet
  • 75 lpi 0.6mm PET lenticular sheet
  • 200lpi 0.15-0.18mm 3d lenticular lens
  • 60 lpi lenticular lenses sheets
  • 161 lpi lenticular lens film
  • 70LPI 3d lenticular lens sheet
  • 40 lpi 3D lenticular sheets
  • 50lpi lenticular lens sheet material
  • 53lpi lenticular lenses sheet
  • 20 lpi lenticular sheet
  • 25 lpi lenticular lens
  • 10 lpi PS  lenticular sheets
  • 12lpi PS lenticular lenses
  • 15lpi PS lenticular board
  • 16lpi PS lenticular lens
  • 22lpi PS lenticular lens sheet
  • 90 lpi 3d lenticular sheets
  • 10 lpi - 200 lpi lenticular lens sheet
  • large size 3d lenticular sheet
  • lenticular sheets
  • lenticular lens
  • lenticular sheet
  • lenticular lens
  • lenticular lens sheet
  • 40lpi 3d lenticular board

Product Abstract:

40LPI lenticular sheets for inkjet printer-3d Lenticular-3d lenticular card


Product Description

40LPI lenticular sheets for inkjet printer

We make all lenticular,and we only make lenticular,we are professional in lenticular.LenticularMobi.

 

15 lpi 3d lenticular lens sheet materials

15 lpi lenticular sheets
15lpi 3mm thickness plastic 3d lenticular lens
lpi:15
material:ps
size:w122*h244cm
thickness:3mm
weight:9.6kg/pcs
packing:wooden packing
effects:flip,zoom,animation,morphing
printed by:usually used for inkjet/uv flatbed printer
15lpi plastic lenticular lens sheet,is good for 2d flip effect,means that from one image to another image flip effect.
effects suitable to 15 lpi lenticular lens sheets: best for 2d flip effect.


 

40LPI lenticular sheets for inkjet printer

Lenticular board:10LPI,12LPI,15LPI,16LPI,18LPI,20LPI,22LPI,24LPI,25LPI,30LPI,32LPI,40LPI,42LPI,50LPI,53LPI,60LPI,62LPI,64LPI
Lenticular sheets:40LPI,50LPI,59LPI,60LPI,70LPI,75LPI,80LPI,85LPI,90LPI,100LPI,150LPI.160LPI,161LPI,200LPI

Lenticular lens sheet pricelist: http://www.ppoo.com/lenticular-price.pdf

40LPI Zhongshan,print wholesalers
High quality'Green and Save lenticular material.
3D printing technology patents.Ceramic tile 3D printing,12 lpi lenticular sheet,Glass Lenticular plate.

40LPI lenticular sheets for inkjet printer

What is Lenticular?
A lenticular is a combination of a special lens and an arrayed image that simulates animation or depth.
How it Works
A lenticular image has two components; a printed image and a lenticular lens screen through which the image is viewed. There are three simple steps from beginning to end.
1. Capturing the images. Since a lenticular image displays one image after another as you change your angle of view, it creates animations much like an old fashioned flipbook. For this reason, each image is called a flip. The more flips you use the more complicated planning and preparation become. For two flips, the process is quite straightforward. The basic rule is that the images must be the same size but they don't even have to be related. As you increase the number of flips the more movie-like the animation becomes. The number of images you can use is partly dependent on the size of the image. Smaller images can have more flips because the angle of view changes little from one side to the other. On larger images, when the angle of view varies a lot across the face of the image, the strips must be wider to prevent "ghosting" when you can see more than one strip. It's said that smaller images can contain 36 or more flips or frames, about 1 second of full-motion video.
2. Interlacing the images. The interlacing software takes the selected images and cuts them into very narrow strips. It then interlaces these strips like a perfectly shuffled deck of cards. If two flips are being created, the first band is a strip from image 1, the second from image 2, the third from image 1, and so on. The software then saves the interlaced image in a file ready for printing.
3. Printing and mounting the images. The interlaced image can be printed on any high quality printer. The print is on or later mounted behind the lenticular lens screen—a sheet of plastic on which a series of cylindrical lenses are molded in parallel rib-like rows. Each or the lenses, called a lenticule, has a focal length equal to the thickness of the clear plastic sheet on which it is molded. Each lenticule magnifies a very narrow strip of the image placed behind it. If you change your angle of view, the strip that is being magnified also changes.
 

Related Products

Contact Us

  • Contact Person:

    Ms.Elaine
  • Tel:

    0086-13136538608
  • Fax:

  • E-mail:

    sales@ppoo.com
  • Chat by QQ