Home > Other 3D lenticular > 3D lenticular sheet material > Supply 20LPI Lenticular Exporters 3D printing machine

Supply 20LPI Lenticular Exporters 3D printing machine

  • 18lpi lenticular board
  • 25lpi PS lenticular board
  • 32lpi ps lenticular board
  • 42lpi ps lenticular board
  • 100lpi 0.6mm PET lenticular sheet
  • 100LPI 0.35MM  PET lenticular sheet
  • 75LPI 0.45MM  PET lenticular sheet
  • 75 lpi 0.6mm PET lenticular sheet
  • 200lpi 0.15-0.18mm 3d lenticular lens
  • 60 lpi lenticular lenses sheets
  • 161 lpi lenticular lens film
  • 70LPI 3d lenticular lens sheet
  • 40 lpi 3D lenticular sheets
  • 50lpi lenticular lens sheet material
  • 53lpi lenticular lenses sheet
  • 20 lpi lenticular sheet
  • 25 lpi lenticular lens
  • 10 lpi PS  lenticular sheets
  • 12lpi PS lenticular lenses
  • 15lpi PS lenticular board
  • 16lpi PS lenticular lens
  • 22lpi PS lenticular lens sheet
  • 90 lpi 3d lenticular sheets
  • 10 lpi - 200 lpi lenticular lens sheet
  • large size 3d lenticular sheet
  • lenticular sheets
  • lenticular lens
  • lenticular sheet
  • lenticular lens
  • lenticular lens sheet
  • 40lpi 3d lenticular board

Product Abstract:

Supply 20LPI Lenticular Exporters 3D printing machine-Lenticular Exporters-Lenticular Exporters


Product Description

Supply 20LPI Lenticular Exporters 3D printing machine

Lenticular pricelist.Lenticular printing.About 3D printing.200LPI lenticular sheet.Lenticular board software,lenticular film.vacuum,Lenticular shearing.


Popular Lenticular Lens Material Introduction:

20 LPI  lenticular sheet

20LPI 3mm Thickness Lenticular Lens Best for 3D+Flip Effect

It is best for big size lenticular 3d+flip effects products,sure,it also support only 3d effects or flip effects(different angle can see different image) .

Support indoor and outdoor 3d lenticular products.


 

plastic lenticular lenses,PS lenticular.zoom effect,3d lenticular lenses sheet,Zhongshan 3D printing.

Supply 20LPI Lenticular Exporters 3D printing machine

Lenticular board:10LPI,12LPI,15LPI,16LPI,18LPI,20LPI,22LPI,24LPI,25LPI,30LPI,32LPI,40LPI,42LPI,50LPI,53LPI,60LPI,62LPI,64LPI
Lenticular sheets:40LPI,50LPI,59LPI,60LPI,70LPI,75LPI,80LPI,85LPI,90LPI,100LPI,150LPI.160LPI,161LPI,200LPI

Lenticular lens sheet pricelist: http://www.ppoo.com/lenticular-price.pdf

Lenticular Exporters Guangzhou,Lenticular Exporters PET
High quality'Green and Save lenticular material.
We make all lenticular,and we only make lenticular,we are professional in lenticular.LenticularMobi.265

Supply 20LPI Lenticular Exporters 3D printing machine

Lenticular FAQ: What is Lenticular?
A lenticular is a combination of a special lens and an arrayed image that simulates animation or depth.
How it Works
A lenticular image has two components; a printed image and a lenticular lens screen through which the image is viewed. There are three simple steps from beginning to end.
1. Capturing the images. Since a lenticular image displays one image after another as you change your angle of view, it creates animations much like an old fashioned flipbook. For this reason, each image is called a flip. The more flips you use the more complicated planning and preparation become. For two flips, the process is quite straightforward. The basic rule is that the images must be the same size but they don't even have to be related. As you increase the number of flips the more movie-like the animation becomes. The number of images you can use is partly dependent on the size of the image. Smaller images can have more flips because the angle of view changes little from one side to the other. On larger images, when the angle of view varies a lot across the face of the image, the strips must be wider to prevent "ghosting" when you can see more than one strip. It's said that smaller images can contain 36 or more flips or frames, about 1 second of full-motion video.
2. Interlacing the images. The interlacing software takes the selected images and cuts them into very narrow strips. It then interlaces these strips like a perfectly shuffled deck of cards. If two flips are being created, the first band is a strip from image 1, the second from image 2, the third from image 1, and so on. The software then saves the interlaced image in a file ready for printing.
3. Printing and mounting the images. The interlaced image can be printed on any high quality printer. The print is on or later mounted behind the lenticular lens screen—a sheet of plastic on which a series of cylindrical lenses are molded in parallel rib-like rows. Each or the lenses, called a lenticule, has a focal length equal to the thickness of the clear plastic sheet on which it is molded. Each lenticule magnifies a very narrow strip of the image placed behind it. If you change your angle of view, the strip that is being magnified also changes.

 

Lenticular Sheets Technology Limited2017/1/21 11:51:08

Related Products

Contact Us

  • Contact Person:

    Ms.Elaine
  • Tel:

    0086-13136538608
  • Fax:

  • E-mail:

    sales@ppoo.com
  • Chat by QQ