Pitch test

Before interlacing it is necessary to determine the exact pitch of the lenticular sheet.

Lenticular Mobi will distinguish the visual pitch and the mechanical (or absolute) pitch. 
To determine the visual pitch of the lenticular sheet, it is necessary to carry out a pitch test.

Lenticular Mobi can provide this file to our customers (free).
This file will be used to output a film or a plate.

It is possible to determine the pitch by placing a lenticular clear sheet on the plate (or the film) and look at the viewing distance of the final image. We warmly recommend to print the pitch test so that you will determine the exact value.

One line will be totally black or invisible, it will be your visual pitch.
The result will be more precise if you print the pitch test on the lenticular sheets.

If, for example, the test shows that the optical pitch is 75,48 LPI, you will thus interlace 16 images in

The mechanical pitch will be determined using a magnifying glass.

Computer

You need a computer with a memory (RAM) minimum of 2 GB and a processor of at least 2 Ghz.
The lenticular files can become enormous, and the imposition, if it is not made in the RIP is very heavy for a workstation.

Software:

A minimum of 300 lines per inch is essential for an acceptable quality, a higher quality can be obtained with 450-500 lines. Adapt linescreen to a value mathematically compatible with the pitch of the lens will produce a better result, this can also reduce or eliminate the banding caused by interpolation of the image when creating dots.
Specific screen angles must be used to avoid moiré. We can provide you this information.

The CTP (or CTF) must have a resolution of at least 2400 DPI, a higher resolution will give a better result. The majority of the current CTP have a capacity between 2400 to 4000 DPI, some can achieve higher resolution, they are mainly designed for safety printing.

The standard films have a thickness of 0,01mm, whereas 0,018 mm are recommended for a better stability of measurement. Note: when using 0,018 mm films, the laser heads should be recalibrated.
In the same way, when using high resolutions, the proper laser resolution intensity values should be established and setup, also exposure curves created, to produce linear reproduction of dot values.

Proofing

The 3M Imation match print system was working perfectly when printers were using films.

Today the proofing is more problematic.
It is possible to test the effects using a high resolution inkjet printer (min 1440 PPI) but it will be necessary to adjust the pitch to this device as the pitch will be different from your CTP.

So this system would work only to test the effect but the result will be totally different than the printed piece.
Some current CTP providers (Kodak) are proposing a direct proofing system that will give a result matching the final print.

For more information,pls visit www.lenticular.mobi or send an email to ok3d@lenticular.mobi

-------------------------------------------------------------------------------------------------------

Hot tags:

Lenticular    Lenticular lens    Lenticular sheet   Lenticular printing     3d Lenticular   Lenticular    Lenticular image    3d printing   3d print      3d printer     Lenticular Exporters      Lenticular manufacturers   Lenticular factory      lenticular Suppliers    Lenticular array   lenticular Importers    3d lenticular     3d lenticular printing service     3d lenticular design    lenticular print   3d lenticular cup    3d lenticular printing   3d lenticular poster   3d lenticular picture   3d lenticular sheet    3d lenticular notebook    3d lenticular bookmark     3d lenticular software    3d lenticular card      3d lenticular postcard     3d lenticular placemat    lenticular plastic    lenticular sheet     lenticular plate    lenticular board    lenticulars        3d lens      3d sheet        fly-eye-lens