3D printing elements
  (A) paper. Printing paper requires a close, smooth, flat, scalability characteristics of small; typically use bond paper or a paper jam.
  (2)lenticular sheet material. There are hard plastic lenticular sheet. Using polystyrene as raw material after injection molding cylinder-shaped convex grating film. Polystyrene colorless transparent (transparency of 88% -92%), the refractive index of 1.59-1.6, no ductility, flammable. Because of this high refractive index, it has good luster. A transparent plastic processing to produce stress birefringence - optical effect. Its tensile strength of 3.52-6.33MPa, the bending strength of 6.12-9.84MPa, heat distortion temperature of 70 ° C-98 ° C. Chemical properties of polystyrene is resistant to certain mineral oils, organic acids, alkalis, salts, lower alcohols and water. Encountered hydrocarbons, ketones, esters of higher fatty softening erosion, soluble hydrocarbons and toluene, ethylbenzene and styrene monomer. In some cases, chemical reagents degree of erosion of the polystyrene by annealing, and other measures to eliminate and reduce stress.

(3) ink. There are a number of ink manufacturers to provide for 3d lenticular (3D) the printing ink additives, some manufacturers have developed a new type of ink production line. Note, however,3d lenticular foam ink printing ink is not actually any visible foam will affect the degree of clarity and 3d lenticular effect.

3D printing ink, the curing temperature of the ink in standard plastic solidification range (149 ° C-171 ° C), but must be raised to a curing temperature for thick ink. If the ink is fully cured, the ink will have a standard plastic 3d lenticular ink as good elasticity.

(4) adhesive. Adhesive role is to make print and grating film can be firmly pasted together; secondly also to protect the ink layer at high temperatures without discoloration.

For more information,pls visit www.lenticular.mobi or send an email to ok3d@lenticular.mobi
 

-------------------------------------------------------------------------------------------------------

Hot tags:

Lenticular    Lenticular lens    Lenticular sheet   Lenticular printing     3d Lenticular   Lenticular    Lenticular image    3d printing   3d print      3d printer     Lenticular Exporters      Lenticular manufacturers   Lenticular factory      lenticular Suppliers    Lenticular array   lenticular Importers    3d lenticular     3d lenticular printing service     3d lenticular design    lenticular print   3d lenticular cup    3d lenticular printing   3d lenticular poster   3d lenticular picture   3d lenticular sheet    3d lenticular notebook    3d lenticular bookmark     3d lenticular software    3d lenticular card      3d lenticular postcard     3d lenticular placemat    lenticular plastic    lenticular sheet     lenticular plate    lenticular board    lenticulars        3d lens      3d sheet        fly-eye-lens